87' GN last time under the Knife!!

[HelloBozos]

Hello,

Haven't posted in while aka Cars been down. Me under WOT, the factory boost gauge line slid off. The XFI saved the motor but it did cause radiator fluid damage. The car has no water in the oil,but looses all the water in 20 minutes of drive time. My guess it's out the exhaust or i have sleeve cylinder malfunction. So...... Being it's time for frame off paint job (with extra's) The motor's coming out an car goes to Paint an Body. My current plan is to turn it into a GNX Cosmetically,Have Super Car type drive train (go 200mph),Retain the stock interior. Currently the car makes over 700hp ,an pulls serious corner G's but has the original paint an frame bushings.All the bumper fillers,flares an hood are un painted fiberglass still,all the a-arms front back upper an lower are BMR's,Aerospace Prostreet disk all around,bilisteins,custom rate springs,Falken auto-cross meats, 295/40 18's in the bcak 255/40's 18's up front.Currie 9" with 3:20 gears with bullet proff 200r4 non-lock-up,Motor has gt-71 percision turbo,72psi injectors,single meth kit,218 roller cam 1:65 rockers with iron GN1r's,RJC front mount Photo's of it cleaned up an current pic 10-12-11










More to come

 

[WillRideAgain]

Good luck with your project HelloBozos, sounds like a good plan!

 

[jlat]

hello; I like the car and you've got alot of work to do. I'll be watching for you're future posts.
good luck
IBBY

 

[HelloBozos]

10-14-11, Motors loose an ready for the crane..This motors Stock block an intake,Thats about it...8^)...keeping all the accesseries,A/C,Radio,etc,etc












Next the hoist an to the Machine Shop for the tear down, I Do Have Water in the Oil....8^(...OilPan Oil was chocolate milk..8^(....

Enjoy!

 

[HelloBozos]

An It's Out...





This the Int....



Posten GNX dash,Alky control in lower left panel,Alpine CD radio..heh..with a Remote!..heh





My only whoa's. Couple seat rips an the typical mid-dash Split,Speaker cowels cracked to, i have new on in box waiting
Now i have to decide which shop to take it to for the frame off paint job,My budget is $10,000,I'll be cutting it close

Enjoy!

 

[HelloBozos]

Auh Ha!! I cracked the number 4 cylider Sleeve!! Remady, If the blocks not cracked,we'er going to chrome molly sleeve, If cracked, going to put the billet mains out this one into new one..Happy Birthday to me!!..heh

 

[G NASTY]

Nice project! Great starting point. I don't know about 10k If your including stripping your frame and painting, including undercarriage. That might be pushing it for you. what rear tires are on it?

 

[HelloBozos]

Nice project! Great starting point. I don't know about 10k If your including stripping your frame and painting, including undercarriage. That might be pushing it for you. what rear tires are on it?

I was quoted $600 for the frame stripped an black epoxy shot, i 'm sold. tires are 295/40-18's in back 255/40-18's up front, really close to what a Nissan GTR has. Falken Anizs auto-cross meats,Cornering is effertless with my suspention mods

 

[HelloBozos]

Update! I cracked the sleeve an the Block!



I'm told it'll be $2700 for full machining,New block,fully assembled again!! Great Deal!! Now in about 3 weeks the car's going to the Paint an Body shop. I found guy localy thats been around 30 years. He's pricey but the will be will done Right!!! the first time. Here's photo one the cars he's working on (Pro-Street,Supercharged 572 big block,SS impala) it's cell phone shot an is a little shakey,more to come later when i drop my car off to him



Enjoy!

 

[HelloBozos]

The Motors Rebuilt!! Only waiting on HeadGaskets (New block an the billet mains an internals transfured over) I got away with $2700 rebuilt. 8^) It's new 109 block,ole GN1 stroker kit,218 roller,GN1 heads,ported stock intake,70mm TB



When motors out the machine shop the car goes to a Shop for Frame off Paint, more photo's when the cars apart....

Enjoy!

 

[HelloBozos]

Eye Candy Tease an update..This car below is about done at the Shop my cars assigned to.Its a ImpalaSS 572 with blower!!

shakey cellphone shots




I pick my motor up any day now, an my Cars being flatbedded to Bob Alfords Custom Cars | Pro Street Cars | Car Restorations | Classic Cars | CNC Machine Shop | CNC Machining

More to Come!!

Enjoy!

 

[HelloBozos]

The Motors Rebuilt!! Only waiting on HeadGaskets (New block an the billet mains an internals transfured over) I got away with $2700 rebuilt. 8^) It's new 109 block,ole GN1 stroker kit,218 roller,GN1 heads,ported stock intake,70mm TB

View attachment 149064View attachment 149065

When motors out the machine shop the car goes to a Shop for Frame off Paint, more photo's when the cars apart....

Enjoy!

The Bottom-End, Nice an Shiney..heh..



Still waiting on Head Gaskets,The Cars Planned to go into the shop next week from this post...I'm Eggstatic!!

 

[HelloBozos]

12-20-11 9am est Orlando,FL, The Car goes to the shop, Bob Alford pro street customs in Orlando,FL. My original budget of $10,000 is thrown out the window!! For all i want an am getting done i'm going to be in the $20,000 to $30,000 range...Best thing is i get to help/wrentch the whole way,saving alot of dough!! Next up will be taking it all apart..Motors out an completely rebuilt,waiting to pick it up any day now



Doing a Pro-Touring set-up with GNX exteroir with either 4 point or 6 point rollcage

 

[Eazy-E]

This thing is gunna be sweet... i cant wait to see the end result!!!

 

[SuperSix]

Subscribed!

 

[Royal-T-Ltd]

cant wait for the pics to start rollin in.....

 

[HelloBozos]

Disassembly has begun!!

 

[6APPEAL]

Subscribed.

 

[HelloBozos]

Motors Done!! Brought it to the Shop today. Central Florida Machine & Speed built it (407) 877-2800 ,794 Business Park Blvd. Winter Garden FL,34787



109,Billet mains,Stroker,GN1 heads,72inj,GT-71 turbo,70mm Throttle Body,all port an polished

Cars in the process of being straightened....

 

[HelloBozos]

This car was just finished where my cars at, a SS Impala,572BB Blown,over 800hp.Belongs to an Executive for the Miami Dolphins.Get's picked up any day now