87 limited street/strip roller

[dentmasters01]

The car is ExTREMELY clean underneath and inside with only 43k miles. Car features a 10 pt chromemolly cage, with COMPLETE interior. Cusion bench seating front and rear. Its not been cut up and the A/C is still on the car. Complete custom ladder bar suspension with koni fully adjustable (upper and lower) shocks and 4 wheel disc. Car has put down 1.2x's 60 footers with conservitive 8-9 lb launches. Custom 9 inch with locker and 35 spline axles. Frame has not been notched. Car has all safety features and was certified to 7.50's. expired. Glass hood and bumpers, doors have no support bars, but the buyer gets the origional doors that came off the car and the origional carpet that has been stored away. (regular regal carpet in car now)
In the tank ATR double pumper
Nitrous controls in the glovebox and pill box underhood
Msd ign.
C02 bottle in car for airshifter for 1-2 shifts
F.A.S.T xfi system installed.
Weld warrior wheels with brand new slicks. 0 runs.

15k
obo

 

[onefastgn]

Correct me if I'm wrong but is that 15k without a motor?I would have to see alot more pics and alot more details about the car for that price.Could you post more pic and more about the car?Where is the motor?

 

[dentmasters01]

Well, the motor is setting im my garage.. ??? the motor is not forsale though.
The car has about 12k worth of rearend, suspension, cage, and engine management on it alone, not to mention its an extremely clean, solid 43k mile limited street car that will handle the power you would like to put to it. The suspension was quite expensive and works very well. With the old motor it tracked straight as an arrow with 60 footers in the 1.20's and ran 5.80's in the 1/8th with the same mph you ran in your sig in the 1/4. I will post more pics after I get them shot this weekend. These were the only ones I had at the moment.

If your interested in buying the car then send me your email and I'll send you all the pics you want.

 

[dentmasters01]

here are several more pics in as much detail on the car, the suspension, and several other things you may want to see. If anyone has any questions or want to see anything specific just let me know.
Thanks

 

[dentmasters01]

few more of the nitrious controls, carbon fiber driveshaft, fpr, ac

 

[dentmasters01]

msd, shift light, air shifter actuator, wheels with large studs, 4 wheel disc brakes.

 

[dentmasters01]

Fab9 rearend, 3 inch exhaust, suspension, cage tied into suspension

 

[dentmasters01]

full ladderbar suspension

 

[dentmasters01]

ttt

 

[dentmasters01]

open to offers !!

 

[dentmasters01]

ttt