A-arm bushing shield

[Royal-T-Ltd]

Is there a shield for the r/s upper a - arm that fits the FACTORY a-arm..... i know there are shields for some tubular a-arms... and i have seen the shield which wraps around the DP but, does anybody make a shield for stock a-arms? TIA

 

[JDSfastGN]

check on Kirbans site. I used one but it doesn't fit well with my ATR headers. It would rub and cause false knock so i took it off. But it did do it job while it was on there

 

[Royal-T-Ltd]

I got ATR headers also.... so scratch that idea. Thanx though

 

[salvageV6]

Many folks fabricate their own from one of the heat shields that comes with the air bag kits.

They work okay and can be bent/cut/modified to be a universal device.

As long as you have a 1" or so air gap between the bushing and any exhaust.

 

[DavzGN]

I know john's performance has them under the Gbody suspension section of their catalog

http://www.johnsperformance.com/

HTH
David

 

[#1HotRod]

Many folks fabricate their own

Many folks fabricate their own

I have stock A-arms & 3" Houston DP. Made shield from scrap sheet of aluminum & one of those fancy hose clamps used on turbo big-rigs. Painted black to match powder-coated DP. Blends in real-well, can hardly see it, looks stock & works (I think!).
Cut two elongated holes that the clamp will fit thru, bend shield to shape of half-circle, only part around DP is the clamp, & shield has plenty of air space between itself & DP & bushings. Scuze me if misunderstood, but this works for me. G'luck....Ray

 

[TURBOGTA1]

I took a nice peice of heat wrap, wrapped complete corner of bushing, and used wire to secure. so far so good!!! holding up fine

 

[Doug Borgh]

See PSMBuick.com