A "CRS"..

[Chuck Leeper]

moment.. {seems I'm having these more frequently.}
Here's a pic of the trans cooler line pad and brkt, I took off the 87..
There's a slot in the pan rail at the #4 bolt. AIRC, it goes there. Y/N??
If so, which way does the rubber snap onto the lines, toward the block, or outwards toward the frame?

Or, does it even go there??

 

[1KWIKSIX]

Chuck, I believe the bracket is attached on the transmission, near the starter motor and its function is to keep the transmission line away from the cross over pipe?
I think the rubber pad is placed on the side of the radiator and keeps the two transmission lines that wrap around it from touching the radiator.
I'll try to dig up a picture / diagram.

 

[V6POWER]

The bracket goes under the lower right side bell housing bolt.

 

[MDavis]

.

 

[1952ray]

Pad goes wherever you like it.

 

[Chuck Leeper]

Pad goes wherever you like it.

 

[Chuck Leeper]

GOT IT! Thanks, guys....
I spent considerable time in the shop manual... No luck.

CRS has hit , YET AGAIN!! The retainer tab on the TV cable. Which bolt does it go on? {Looks like it would fit on the inner most hole on the back of the head, W/ the grnd wires?
Where did the PDF come from? If I had access to that link, I'd look like a much more seasoned TR guy!

 

[1952ray]

( a more seasoned TR guy) hell I happen to think you are pretty dang good.

 

[salvageV6]

Anyone know the name of the guy that ran 11's at 144 mph?

Speaking of CRS.....

 

[Chuck Leeper]

Anyone know the name of the guy that ran 11's at 144 mph?

Speaking of CRS.....

Me???

 

[salvageV6]

Dunno, I have CRS as well.

Those poor street tires....