A really basic question

[just plain john]

I'm working on my hybrid build, with a GN dash swap as well. Looking at this Connector Pinout Diagrams, is this the front or back? I see C100 in my schematics, same thing as the fuse block bulkhead connector?

 

[85Dan85TType]

Yep C100 = Fuse Block Bulkhead.

The diagram on that one is (if I remember right off the top of my head) the engine bay side. If the plugs are off, it would be the female end. The numbering system on that is still weird to me.

 

[just plain john]

Thanks for the reply Dan. What about the lower diagram?

 

[garyk1970]

Always check pin#1 and its color code for orientation .....

 

[just plain john]

I don't understand what you mean

 

[turbo nasty]

The pins and cavities are numbered or lettered reference off of that

 

[garyk1970]

When you're looking at a schematic the wires are colorcoded and the bulkhead connector with have all the wire terminals numbered for reference ...