Advice needed: Alchy Injection on my setup

[Earl H]

I'm trying to get a little information on alchy injection for my application. Its a 97 Cobra (Mustang) running about 16 psi thru a T-Trim Vortech. Compression is 9.5:1. I'm running about 24 degrees of timing up top. I'm currently running Turbo Blue 110 octane full time which is pretty hard on the Speed Pro O2s. I want to be able to run at about 90% of my current power level with 94octane and alchohol. I wanted to know:
1.) Is it possible
2.) Which kit is best (for high hp applications)
3.) Is there anyone in MI that could help provide post installation tuning advice/assistance

Thanks in advance for any help that you may provide.


BTW, I am not trolling the site. I am actually a GM employee who greatly admires the Turbo Buicks. I just happen to own a Ford vehicle (former employer).

 

[PRSRIZD_V6]

Where are you in MI, there are a lot of us actually!

Email me.

 

[Earl H]

I am in Rochester Hills.

 

[BLACK6PACK]

The SMC kit should work fine. I'm running 24-25 psi and alky with 24* timing and it runs pretty good.

 

[Earl H]

What compression ratio?

 

[BLACK6PACK]

8.5:1

Check out steve's site http://www.smcenterprises.com