By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!The question that has not been answered is will this pump work with stock lines and can you get the pressure to 42 line offThanks
Kevin:biggrin:
The question that has not been answered is will this pump work with stock lines and can you get the pressure to 42 line offThanks
Kevin:biggrin:
Anyone know what's the dead-head pressure on these Aero HP340 pumps?
so what is your opinion?Was able to make 605RWHP with the new Aeromotive pump and a dual nozzle alky kit on 6 today.
The XFI measured duty cycle at 55%.
I would have to think the duty cycle will jump pretty fast at a certain point but i have not reached it.
This car is base pressure,line off,engine running, 46#s
Was able to make 605RWHP with the new Aeromotive pump and a dual nozzle alky kit on 6 today.
The XFI measured duty cycle at 55%.
I would have to think the duty cycle will jump pretty fast at a certain point but i have not reached it.
This car is base pressure,line off,engine running, 46#s
Updates anybody? I decided to have Racetronix build me a double pumper with Walbro's GSS340 pumps. But if there is a better pump (DW301 or Aeromotive) I want to have the kit up graded. Someone mentioned earlier that Walbro was coming out with a different pump. Any up dates on that?
I just bought a Walbro 340m from racetronix and it failed after 24 hours. I'll report back if they replace it or not. I have to pull it out of the tank to check if a line is kinked, racetronix says it must be a kinked fuel line inside the tank that caused the failure. It will only prime to 5 psi. Had great pressure for one day though!
???
Just an FYI