Air Bags install

[Ktbregal]

Do you install line up or down and I assume you put the spacer wherr the line goes.

 

[scojack_2001]

I installed mine down. No problems. Used the spacer as well. Ran the air lines through the frame to the back bumper. Took two of the bumper bolts out on the bottom and evenly spaced them and put the valves there. Easy access, easy to fill, and convenient. Works well and looks good too.

A tip to install the bags: take the black cap off, roll the bag as tight as you can, replace black cap, and install into the spring. Works every time.

 

[626gn]

Down through the spacer then back up to route thru the frame rails. Be sure to leave enough slack for wheel travel.

 

[scojack_2001]

Agreed. And make sure the lines stay away from the exhaust. I ziptied my lines to the coil springs.

 

[Ktbregal]

Ok I have heard both ways. Thanks

Sent from my SAMSUNG-SGH-I747 using TurboBuick Mobile mobile app

 

[hiboom]

The first set I installed it bottomed out with the lines threw the top and busted the air fitting on top of the bag the second set I put the with the fitting down no problems since


Sent from my iPhone using Tapatalk

 

[1KWIKSIX]

Here yo go!

http://www.catalograck.com/imgVD/AIL/MN-407_60844.pdf