Rear Seat Divider Board, install question

[54Rich]

My rear seat factory sound deading, fell apart when I removed it, so I picked up this:

The Parts Place

1987 Buick Skylark/GS/Regal/GN OE STYLE TRUNK SIDE REAR SEAT DIVIDER BOARD (INSTALLS IN FROM THE TRUNK SIDE BEHIND THE UPPER REAR SEAT BELOW THE SPEAKERS)

www.thepartsplaceinc.com

Any idea how to install it? There's one of two ways to put it in, neither really looks like it will work. Anyone install this?

Thanks,

Rich

 

['87 Turbo "T"]

My rear seat factory sound deading, fell apart when I removed it, so I picked up this:

The Parts Place

1987 Buick Skylark/GS/Regal/GN OE STYLE TRUNK SIDE REAR SEAT DIVIDER BOARD (INSTALLS IN FROM THE TRUNK SIDE BEHIND THE UPPER REAR SEAT BELOW THE SPEAKERS)

www.thepartsplaceinc.com

Any idea how to install it? There's one of two ways to put it in, neither really looks like it will work. Anyone install this?

Thanks,

Rich

Hey Rich,

The one I ordered is similar to the one in the link.

Jute on one side, rubber type coating on the other. Hangs from the three hooks(rear deck) on the inside of the cabin.

Rear Seat to Trunk Divider Jute Padding, GBodyParts.com

 

[54Rich]

Looks like the holes are not in mine, must be a generic "one size fits most". GBody looks like it would work better. Thanks

 

[TurboTGuy]

I used a G Body Parts one when I welded in a Tin Man rear seat brace. Fit real nice.

 

[54Rich]

I contacted REMAutoinc.com who actually makes the part. It gets installed in the trunk, so the part description is wrong. At least it will hide bracing.

 

[Hunter Dog]

I believe I purchased on from GBody Parts as well and had no issues installing mine. Look close at yours to be sure the three holes you expected are not there because they did not completely punch out the material that fills the hole.