Air filter part number

[ETraugott]

Going over my new GN and the K&N filter has a hole rubbed in it and needs replaced. The search function is not working and have looked but could not find answer. my filter has a 3” opening, 7” long and 5” diameter. Ive seen people taking about running a 9” filter but have not seen any part numbers. does anyone have a part number handy so i can order a filter.

 

[1986 Buick GX1]

I would highly recommend the AEM dryflow synthetic filter as it flows better than k&n due to the velocity stack inlet neck, plus there is no oil to coat your maf sensor and make it read funny.

This particular one has a 3" inlet that's 1.5" long which may be enough to drill a hole for the iat sensor. It's a conical filter that's 6" on the big end (by the neck) and 5.125" on the small end with a filter length of 9.25", but the best part is........ it's black.

Check out the link.

https://www.summitracing.com/parts/ais-21-2039bf

Cheers,
George

 

[ETraugott]

looks like what i need. thanks

 

[1986 Buick GX1]

You're welcome. Sometimes you get lucky searching and sometimes not so much.