ALky Nozzle

[Chatmanboy]

Does any one have a pic on how they ran the nozzle for the alky? The instructions say on the up pipe but i dont see none on an up pipe on engine pics that says they have an alky kit...

 

[Pittsburghkid]

Does any one have a pic on how they ran the nozzle for the alky? The instructions say on the up pipe but i dont see none on an up pipe on engine pics that says they have an alky kit...

Thats because yours is a hot air car so it doesn't have an up pipe. I'm sure your hot air brothers will jump in here and give you the proper mounting locations for the alky nozzle or you can also call Julio and he can direct you.

 

[RegalT-type85]

I dont have a alky kit yet but I think you tap into the turbo adaptor or that turbo to intake pipe section. sure others WITH alky kits will chime in.

 

[Waco84GN]

Has been talked about

http://www.turbobuick.com/forums/hot-air-non-intercooled-tech/307847-hot-air-intake-inside-pics.html

http://www.turbobuick.com/forums/ho...-where-best-place-spray.html?highlight=nozzle

Probably the two best articles on this question.

Jerry jr.

 

[Chatmanboy]

Does the the alky tank supposed to be filled to the top or where it reads full?

 

[BRAD_PADGETT]

Does the the alky tank supposed to be filled to the top or where it reads full?

To the top. The Razor kit has a low Alky indicator you put in the dash which tells you when the tank need to be refilled. Brad

 

[Chatmanboy]

Ok alky kit installed. Now my ? is when i push the test button the car starts to idle funny. The vaccum/boost gauge read 17 on start up 12 after i push the button also the oil gauge will flicker back and forth. what does this mean? To much alky?

 

[BRAD_PADGETT]

All this means is the alky pump is working and spraying methanol. That is why it is called a test button. Brad