I'm going to be totally honest here.
I slept til noon and had a dentist appt. at 2 that i forgot about
by the time i got everything boxed (NOW) the post office is closed.
But everything is boxed addressed and ready to go.
Will get everything in the mail and get you all tracking numbers tomorrow morning.
And don't worry Scott, I put more newspaper than you can imagine into the box that everything fit in. So everything will safe with the door piece.
Updated list of stuff:
BURGUNDY UPPER AND LOWER PANELS COMPLETE WITH ESTRUCHENS AND PULL STAPS
NON-concert cound lowers, only thing missing is the pull strap screw covers,
these are in really really nice shape - 150$
GN GRAY B-PILLAR TRIM
Top of Drivers side a little scratched (surface scratches, will look mint resprayed)
Otherwise all others are in average condition - 25$
JL AUDIO 3.5" SPEAKERS
Like new, NOTE: will require some mods to fit under the speaker plate of a Buick.
I only played these for about 10mins to decide btw this and another speaker.
Model: TR350-CXi, soldered a wire onto one terminal, otherwise like new. 50$
SCANMASTER SHADE HOOD
From TR Customs, new and sealed, this is a plain black version w/ no engraving.
AUTOGAGE MONSTER MEMORY TACH WITH SHIFT LITE
Model # 233906 - New in box 120$
FRONT BRAKES - ROTORS AND PADS, OFF MY LOW MILE GN
I don't think these are the originals, the car stopped very well with these.
Mechanic even called when i was having my SSBC setup installed
and asked why I was changing them out and asked if I wanted to leave them.
Stock size, the rotors look like new, plenty left on the pads.
Don't know what to ask for these? 100$ OBO
Complete with plate, ashtray, door. Small crack in front corner that sits under the radio,
highly doubt this will be noticeable when installed.
Otherwise this is in very nice shape - 100$
14" x 3" INLET K&N FILTER
This is banged up from the ac lines, not pretty but gets the job done.
Good for someone on a budget. 5$
STOCK UP PIPE WITH ALKY NOZZLE
Pipe in decent shape, nozzle has less than 100 miles on it. 30$
BSTC BOOST CONTROLLER + NOS WASTGATE SOLENOID + CASPERS WGS SPLITTER
This is a plug n play package for using the BSTC at high boost levels, provided you have a working solenoid.
BSTC Used but mint condition, Solenoid and Splitter new and in packaging. 200$ and im not splitting this package.
NOS COOLANT TANK
STOCK BOOST LINES
2004R SUPERIOR SUPER SERVO
Used but in excellent condition - 100$
3" SILICONE HOSE
Connector hose, few inches long, thick silicone, from fullthrottle, brand new 5$
FRONT DRIVERS SIDE NOS GM BUMPER FILLER
No, I dont have the passengers side too. 100$
STOCK CHARCOAL FUEL VAPOR CANISTER
STOCK ROCKER SHAFTS
Nice condition - 25$
2004R PAN GASKET
STOCK STARTER AND ALTERNATOR
Best REASONABLE Offer, no i wont take 5$ shipped as i can use them as spares
240 AMP ALTERNATOR
Stock appearing, the one Jack and the "other" board sells. 225$
MSBC-1 BOOST CONTROLLER
New in box, I'm not sure I want to sell this, so make an offer close to what it costs new if you want it, I'll move a few bucks on it.
FEL-PRO ES74022 HEAD BOLTS
New sealed box. 20$
QUAD AIR MODDED ECM
86/87 ECM modded by Red Armstrong for use with big injectors. 200$
GRAY DASH SURROUND
The peice that goes around the instrument cluster, just dirty, good shape, 30$
NOS UPPER RADIATOR HOSE
USED CLEAN UPPER RADIATOR HOSE
RACETRONIX DUAL FAN WIRING KIT
OEM 2004R TRANSMISSION PAN
Very clean. 30$
BIG BAG OF TRANSMISSION SEALS AND GASKETS
I have no idea wtf is in here, 10$
KENNE BELL OIL PRESSURE BOOSTER PLATE
Appears to be new, comes with paperwork. 10$
STOCK OIL COOLER PLATE AND LINES
Best reasonable offer.
GRAY REAR SEATBELTS
Clean and good shape - Best offer
GN TRANSMISSION GOVERNOR
NOS - AC Delco # 8655976 - 125$
PTC Converter available again.
10" 2800 stall lockup, NEW IN BOX. 525$
Have a few more things to add,
Ashtray switch panel... the nice black pete h version,
3" polished uppipe, stainless brake lines,
nice fullset of door estruchens, standard pressure adjustable WGA,
and some more stuff i gotta go through.
stock upipe w/ alky nozzle sold
everything else from the last copy of the list is available.
Would you happen to have the console gauge holder for sale still? Also, I am very interested in your COMPETITION ENGINEERING ADJUSTABLE DRAG SHOCKS Part # C2600 - FRONTS - New in box - 75$ for both
Let me know as I have PayPal ready to go ASAP.
Thanks so much,