Aluminum driveshaft

[Jared31]

Looking to upgrade to an aluminum driveshaft for my street gn that is a low to mid 12 second car. Is it worth the money? And if so who makes the best driveshaft

 

[Boost231]

At your level I would just upgrade the u joints on your current shaft.

Sent from my SM-G935T using Tapatalk

 

[salvageV6]

They can be a bit noisy on a daily driver shifting in and out of gears with the lash that's in the drive line.

Dynotech in MI has the specs. on file for a stock length GN in 3" and 3.5" sizes.

I'm sure you can find a better way to spend the money.

 

[Jared31]

Thanks will spend my money on other mods

 

[87national55]

At your level I would just upgrade the u joints on your current shaft.

Sent from my SM-G935T using Tapatalk

Is that a diy job?


Sent from my iPhone using Tapatalk

 

[chris kirk]

Should install a drive shaft loop. Better safe then sorry....

 

[Jared31]

Put one on last year. I believe it’s a hr

 

[Pronto]

If you're changing the U joints to solid ones, it's not a bad idea to have the driveshaft high speed balanced at a shop. It will help lower any driveline vibrations.

 

[Boost231]

Just have a shop do it and check the balance while it's there

Sent from my SM-G950U using Tapatalk