This is stock GN 2004r trans and I just put a shift kit in. I thought I should double check the TV cable. It was 5-6 clicks out. If I push it in all the way (button pushed) to where there are no grooves showing and then mash the pedal to the floor the cable moves out only 1-2 clicks. It also makes quite a loud snap noise when doing this. At this position if I move the throttle cable by hand all the way open the cable appears to be extremely tight. Does this sound right? It almost seems like it is too tight and I should move the cable out a few notches like it was.
Need your opinion before I start driving this.
paul
Need your opinion before I start driving this.
paul