I am looking for the updated VLOM, what is the part number and if they are available?
To make a long story short, lifters went bad and a bent push rod. We fixed put in all new lifters, and had it tuned. Well anything over 1/3rd throttle or so the check engine light starts flashing. It is a P0300 code. You can not feel a miss at all, but the scan tool says #7 is where the miss is coming from. We did not replace the vlom because couldn't find one. We ohm'd it out and one is off, so I am hoping that is the problem. We changed plugs, coil, and injector on that cylinder. Leak down is good and has as much or more than the other 7 cylinders. So the VLOM is the only thing we can think to try....