Any interest in a THDP for hot air?

[turbowrenchhead]

I am pretty sure I am going to go to external gate. I had a 2 piece mach THDP made. I have over 700 in this pipe. I'd sell for $225 + shipping. I will sell the upper section. It's 3" and has the larger puck in it. I had hogged out my hole in the exhaust housing to much and now the puck isn't big enough to cover it and gets cocked in the hole. I can't not have the hole any smaller because I get creep real bad. This pipe has been ceramic coated as well. One would have to make the lower half of the pipe. I am having a new upper section made for external gate. There is a pic of the part of the pipe in the link in sig. This pic is before the rest of the upper section was added to it. I had 250 alone into the flange. I can get pics if anyone is interested. I also have a new wastegate for the turbomotion setup. I had a bracket made to mount the wastegate. For anyone that has the turbomotion intake this would work well. Bracket and wastegate $100 + shipping.

 

[cool 84]

I have a friend that's doing a pretty serious build on his hotair. I'll show him this thread.

How's your car running? I haven't heard much on it lately.

 

[turbowrenchhead]

I have had it out of storage for 2 weeks. Some nights it worked great and others it pissed me off so bad I didn't want to even look at it. I have to get the boost disappering under control and now I have a miss under load. It will clear up if you hold the throttle down long enough. Also I can't get enough out of my tps. I have it slotted to the max and I can only get 3.8 volts. I got a new tps today hoping that this one is better.

 

[turbowrenchhead]

I am getting ready to go to external gate. I will sell this upper thdp plus a new wastegate for 200 plus shipping. This works good for guys with the turbomotion setup. It just doesn't work for me because I can't flow enough through the internal with the PT-67 I have on it.

 

[gntony]

Down Pipe

If you are looking for a 3" DP that takes an external waste gate I have a brand new Lee Thompson never bolted up. I paid $375 will sell for $300 + s/h if interested contact me at gntony@yahool.com I might eve consider some trades. This is for a hot air car.

 

[turbowrenchhead]

A lee thompson pipe would not fit my setup because the turbo sits 2 inches back from its orginal spot.