I am (very slowly) building the Vega with a pretty radical N/A engine and have run across a problem. Well, really the problem of the day. I have the engine set-back and also installed a rack and pinion steering system which leaves very little room for a driver's side engine mount. The rack is right where the mount would be. I plan on having the engine solid mounted to the chassis. I have to build something as stock stuff clearly won't fit. Looking at the front of the engine it appears a motor plate might work well with the space I have available to work with. Has anyone ever actually used one? It looks like it bolts between the water pump and front cover. There are a bunch of bolts but they are not very big so I worry some about strength and longevity. The engine is a 4.1L block. I estimate the engine will be at the most 500hp on the bottle. I may eventually do a blow-thru which could be more power but one thing at a time. Any experiences out there? Thanks for any suggestions.