Are there any other "threaded head" nozzles beside aquamist?

[yellow95]

I need a nozzle that screws in from the outside. I tried to find a reducer bushing for the mcmaster carr nozzles, but I cant find anything long enough due to the filter. Who has a solution?

gary

 

[Ron Dona]

The Macmaster-Carr nozzles can be threaded on the jet end and installed from the outside. Added advantage is less internal restriction and easy jet change. I have pic's of the threaded jets I'm using if your interested.

 

[R-R]

That's what I was thinking of doing. Pics would be greatly appreciated.

 

[yellow95]

Ron- Pics would be great.

Gary

 

[Ron Dona]

Don't know if pictures can be posted. Sending them by e-mail.
Ron

 

[PaulRV6]

pics please

Ron, can you email me pics of how you installed these nozzles from the outside? What type are you using? Thanks

paul

 

[Mikel]

I'd like to see the threaded nozzles too. If you want them posted, I can host them for you.

Mikel@midgetse.cx

 

[PaulRV6]

That file of the pics is HUGE. But good.

paul

 

[gofstbuick]

Originally posted by Ron Dona
The Macmaster-Carr nozzles can be threaded on the jet end and installed from the outside. Added advantage is less internal restriction and easy jet change. I have pic's of the threaded jets I'm using if your interested.

I thought you just used a metered misting nozzle. Is that what you're using? I would be interested in pictures. Email: joseph_cheung@dca.ca.gov

TIA

 

[Ron Dona]

I cropped the pics to reduce the file size and will send to Mike who said he can host them.
Ron

 

[kincade]

Mike, if you can post and let us know when you get them hosted, I'd love to see them too...

 

[ONE_QUIK_6]

I would also be interested in seeing the pics, and if someone has the part number for this nozzle? I looked at the mcmastercarr website but they offer a bunch of nozzles.

Thanks

Zak

 

[PaulRV6]

Zak, the P/N is 3178K76 for the M10 and 3178K77 for the M15. They are on pg 1883 of their catalog. Here is the link if it works.

http://www.mcmaster.com/asp/enter.asp?pagenum=1883


They also have copper/nickel but not sure that is needed.

paul

 

[ONE_QUIK_6]

Okay I have ordered the nozzles, now what is this equivelent to in say a NOS jet. Right now I am runnig a .040 jet and seems to be working pretty well. Thanks for any info.

Zak

 

[PaulRV6]

So what nozzles did you order? I think the M15 are the largest in that design.

paul

 

[ONE_QUIK_6]

I actually ordered both, just wondering if someone could direct me in what direction to tune these. Is the m15 close to the .040 jet I am using now or is it way to big??? I know the SMC kit uses some sort of 15 jet but is not .015 inch, but rather an amount that it flows. Will my pump that I have heard puts out up to 100 psi be too much for this nozzle??? Any and all help is appreciated,
Thanks

Zak