Art Car kit Check Ball Placement Please

[fmster]

The instructions for the Art Carr shift kit is confusing,It says to put six balls in, in one sheet which ones??? And on an other sheet it says to just omit 2 check balls out of 9 the TV exhaust and the 4th Accumulator balls.My question is which is the 3rd ball that has to be removed? Thanks.

 

[SSedan64]

It says, if using a 9" converter to leave out the #47 = center checkball in the Valvebody, #47 = 8, 1-2 Shift Valve shown in Fig. #3 & Fig. #5

 

[fmster]

It says, if using a 9" converter to leave out the #47 = center checkball in the Valvebody, #47 = 8, 1-2 Shift Valve shown in Fig. #3 & Fig. #5

I know a about those3 balls in the valve body in fig#3,not those the other 9 it says to take2 of them in fig#5. But on page 8 of 13 section B continued,it says to put back 6 balls out of 9. Thanks.

 

[SSedan64]

Ahh I see, but like you I don't see. Maybe a missprint or they can't count. May have to check with Art >> Art Carr 2004R Performance Transmission, Racing Shifters and Torque Converters

 

[David Husek]

I know a about those3 balls in the valve body in fig#3,not those the other 9 it says to take2 of them in fig#5. But on page 8 of 13 section B continued,it says to put back 6 balls out of 9. Thanks.

There are 8 physical check balls to install and the ninth is a check ball capsule in the case. Forget about the capsule and put in the 6 they are referring too. If you are still confused feel free to give me a call…..

 

[fmster]

There are 8 physical check balls to install and the ninth is a check ball capsule in the case. Forget about the capsule and put in the 6 they are referring too. If you are still confused feel free to give me a call…..

O.k where do I put the 6 check balls?What slots?

 

[David Husek]

The red dots are the locations for checkballs, best info I can supply at 2 a.m.

 

[fmster]

The red dots are the locations for checkballs, best info I can supply at 2 a.m.

Thank you very much David,I got it.All so finally figured out what the check ball capsule was.Good Pic!

 

[SSedan64]

Thanks Dave,
That helped me also.
Todd

 

[fmster]

Thanks Dave,
That helped me also.
Todd

Thanks you too ssedan64.

 

[SSedan64]

Thanks you too ssedan64.

You're welcome fmster.
I see it in the ATSG manual now,
55K - Checkball #7 - Intermediate Servo checkball located in capsule in servo.

Todd

 

[David Husek]

Your welcome, glad I could help out. Any questions, feel free to ask or call...