TOOMANYTOYS
Member
- Joined
- Oct 18, 2003
- Messages
- 229
After replacing some parts and doing a tuneup on my 87 I’m having a problem getting the base settings to stay. I was able to get the tps to .42 but after setting the iac to 49 it has been steadily rising back up after driving it a few times. Checked it today and it’s up to 61 now. Driving around watching the scan master and the numbers go up very slowly. Around one count every 10-15 minutes. I only have about one thread left showing on the adjustment screw. What gives? How do I get this back into the proper range?
Mods are
60lb inj with TT chip and 340 pump
3” dp with pypes dual exh
RJC power plate
ESP fmic
LS1 maf with translator
F body alum rad
Mods are
60lb inj with TT chip and 340 pump
3” dp with pypes dual exh
RJC power plate
ESP fmic
LS1 maf with translator
F body alum rad