Bob....Lean cruise with non LU

[turbo nasty]

Hey Bob was getting my new setup/chip going and noticed in the Extender G instructions that the lean cruise kicks in after the LU is energized for 10 seconds, etc.

I have NON LU now and wondering is this feature still in the chip and does it use the 4th gear switch to enable vs the LU ?

Thanx

 

[TurboBob]

it will still work. the ecm still engages the lockup output, even with a non-lock converter. Lean cruise requires the 4th gear switch.

Bob

 

[turbo nasty]

Ok thanx