Boost adjustment on RJC valve or rod

[86Nick]

Wanting to make more boost. What should I adjust first the RJC boost valve or the actuator rod?

 

[russgoodman]

I always adjust mine with the rjc controller.

 

[jcawley3]

I always adjust mine with the rjc controller.

+1

 

[4-71/Z-28]

i bet you 10 bucks when you turn the rjc nothing will happen, my vote is for the rod depending on how much more boost you want. nothing against the product it just doesnt seem to like certain combo's

 

[QUIP'6']

i tuy rjc in all the way to get 23 psi then i turn the rod in 2 turns to get 25

 

[forcefed3.8's]

You will get more boost out of the RJC controller if you take it apart and stretch the spring. I was running 27psi with a stock actuator. The rod was set so loose, I barely had to pull to connect it to the puck.

 

[jcawley3]

i bet you 10 bucks when you turn the rjc nothing will happen, my vote is for the rod depending on how much more boost you want. nothing against the product it just doesnt seem to like certain combo's

do you have one? my works flawless.... 1 turn= 1lb

 

[4-71/Z-28]

i tried streching the spring, and putting a heavier spring with shims in with no luck, i never figured it out, so i just tuned the rod a few times and got to my goal of 26psi, never figured out the issue with the controller though. i have seen a few others with the same problem, maybe its something in our combo

 

[street6]

i would try and adjust it through the rjc boost controller first.