Tampa T-Type
New Member
- Joined
- Jul 17, 2005
- Messages
- 153
Any one installed one of these? If so where and did anything change except for the sound.
By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!turbo2nr said:I have mine aimed at the fire wall, on my IC up pipe to TB. I was not looking for noise, and I want it clean, no debris into port. Mine will crack open just a little after a shift, at part throttle. I was trying to calm some compressor surge, and improve drivability. I had a few spots my car did not like. I still do. Of course it opens after big boost.
I guess my MAF is a little off, and my car may run rich for a split second, I don't care. My car runs so much smoother in traffic. Before, I had to jab at throttle, then let off, back on, etc in traffic. Now I can cruise without air bouncing around in my IC system. I still have a small bad zone, but much better. Oh well, that's the price for a big turbo and IC trying to act like a "normal" car.
DEFCOturbo2nr said:I know. I have a FAST system going in one day, no MAF then. I have a couple of different Turbosmart BOVs, they have a port made for recycling. I have that. Hook up a hose the size of a horse dick to recirculate. Not interested because the MAF gets ignored when you let off anyway.
i run a BOV with out the recycling, works fine. with the defco function in the PCM you dont need to recycleturbo2nr said:I know. I have a FAST system going in one day, no MAF then. I have a couple of different Turbosmart BOVs, they have a port made for recycling. I have that. Hook up a hose the size of a horse dick to recirculate. Not interested because the MAF gets ignored when you let off anyway.