Camaro LCA Bushing

[sheckyZ28]

Will Camaro lower control arm bushings swap into Turbo Regal Lower control arms?

 

[Turbo T/A 1543]

By application in Moog Chassis, no year Camaro lowers fit our G bodies.

 

[turbofish38]

3rd gen Camaro bushings will fit both the front and the rear lower arms on a G-body.

Eric Fisher

 

[Slow91z]

Camaro lowers DO fit our cars they just don't have a provision for the sway bar...if you don't have one or you run an aftermarket sway bar that doesn't use the provision (HR, ATR, Wolfe) then you're fine.

 

[Turbo T/A 1543]

Now you've got me curious as to the difference. Moog shows a K6177 from '78-'87 on a G body & K6253 on an F body '82-'92 & K6109 on F body '73-'81. Must be one of those "different but the same" things? Possibly a different hardness of bushing?

 

[Slow91z]

Well I know the arms fit, but maybe one has a thicker bushing, or something to that effect.

 

[Taffy]

The Hotchkis LCAs are the same part # for the 3rd gen Camaro and the G-Bodies.

 

[whitess]

Use the 1LE Camaro bushings (90-92). For the lowers in
the rear - #10164152, for the fronts you have to buy the lower
control arms to get the 1LE bushings. The aftermarket ones
are NOT the hard rubber.
Larry.
(Thanks to BlueHog @ montecarloss.com )