car sputters and dies out.

[yarbeau]

My GN has been nothing but a headache lately and I cant figure it out.

car will start up perfect idle correctly for 4 seconds and then begin sputtering and having a hard time idling and then continue on to die out.

check engine light comes on etc.

I'm at witts end!
WHAT CAN I DO please I need some help.

I need a lil more boosting fun before winter hits for 6 months.


Derek.

 

[azbob]

With your limited description, the fuel supply seems to be a good start for checking. The pump, filter, supply etc. Verify your fuel pressure.

 

[QUIP'6']

My GN has been nothing but a headache lately and I cant figure it out.

car will start up perfect idle correctly for 4 seconds and then begin sputtering and having a hard time idling and then continue on to die out.

check engine light comes on etc.

I'm at witts end!
WHAT CAN I DO please I need some help.

I need a lil more boosting fun before winter hits for 6 months.


Derek.

you need to find out what code is popping up. to me it sounds like the maf sensor. try unplugging the maf sensor plug and see if it stays running.

 

[yarbeau]

Just hooked my scanmaster up and these are the readings at idle. i cant get it outta the garage to try a rip and pull numbers.
its running richer than bill gates too. just stinks...

02 millivolts-386
retard degress 0.0
af-10
l8 56
bae 13.7
int 128
bl 128
nph 00
cle 104
at5 55
r l 425
eps .54
lac 77
cc 32
nal 34

tried unplugged maf sensor didnt help..

 

[QUIP'6']

Just hooked my scanmaster up and these are the readings at idle. i cant get it outta the garage to try a rip and pull numbers.
its running richer than bill gates too. just stinks...

02 millivolts-386
retard degress 0.0
af-10
l8 56
bae 13.7
int 128
bl 128
nph 00
cle 104
at5 55
r l 425
eps .54
lac 77
cc 32
nal 34

tried unplugged maf sensor didnt help..

you rmaf is reading high.

 

[TurboBuRick]

Your tps is too high. should be .40-.42 at idle.

Set it with the engine off.

 

[GN owner]

Your TPS and IAC readings are way too high. Adjust the TPS and your IAC should come down to normal. Use this link to adjust your TPS and IAC.

General Maintenance and Up Keep

If the Malfunction code does not go away then check these links out. Your MAF could be bad.
Trouble Shooting
Code 34

 

[RegalT-type85]

COde 34 should be in your SM manual as MAF. Agree with above also, reset it all to right specs and see what happens. I also notice, you have the scanmaster lettering errors, easy fix just send it in to fullthrottle speed.