Coilpacks and Ign Modules

[87gninpa]

I know most coilpacks will work off of the 3.8 FWDs, but do ANY of the ignition modules interchange with our cars? All of the ones i found are "keyed" diferently, but i have heard that some do have the same, anyone know which ones?

 

[Lee_Burough]

There is a list of vehicles with modules and coils that will interchange with ours on GNTTYPE.org....But, I can't find it. I've printed it and taken it to the junkyard for handy reference....I know its there. Maybe you can find it

 

[87gninpa]

anyone know where this is on gnttype.org? i cant seem to find it either........btw thanks for the info lburou

 

[FJM568]

Here ya go...

http://www.gnttype.org/techarea/ignition/type2coils.html

This is the chart for the Type 2 ign module and coils...

 

[87gninpa]

thanks fjm968, would you happen to know where to get he adapter plate? is it still avilable from gm?

 

[mybuick]

yes it is i converted my 84 coil pac to the type 2 from a 2004 chevy monte carlo non super charged. for my 84 i had to get the caspers adapter. but for the intercooled cars it is plug and play.

 

[87gninpa]

great thanks a lot, ill swap the one from my 93 olds ciers and see if it makes a difference

 

[slamming 6]

1990 olds ciers has the braket, module&coils thay work great the coils should ohm out in the 4-5s I think I have this setup my car now its a little hoter spark than the stock setup.

 

[87gninpa]

thanks for the info. if i can only get the module and coilf rom another car, can i buy the bracket>?

 

[ncgreg231]

wow, that's some cool stuff! Looking at the GNttype link, is that the total list? (could there be more donor cars that are not listed?)

 

[87gninpa]

that list was written in 98, so there are cars after 98 that can be used, but nothing before 98 that isnt on the list can be used i beleive