Has anyone done this conversion over standard lower door panels/speaker setup? I am doing this on my *gasp* 87' Monte, with some panels from a GN. Do not have the panels yet but I was told I am only getting the panels with enclosures, no wiring and not sure about any mounting stuff 
.
Do the doors NEED to be cut for 5 1/4's to work? I'm definately not an audiophile but do know a couple basics. Car currently has a RF 3.5"s in front and Pioneer 6x9"s in back. And will be getting a new Pioneer 7600 deck this spring.
So my basic questions are:
What should I do for the wiring?
What is needed or needed to make the speakers fit in the door under the enclosure, and if possible not to cut the doors?
TIA
.Do the doors NEED to be cut for 5 1/4's to work? I'm definately not an audiophile but do know a couple basics. Car currently has a RF 3.5"s in front and Pioneer 6x9"s in back. And will be getting a new Pioneer 7600 deck this spring.
So my basic questions are:
What should I do for the wiring?
What is needed or needed to make the speakers fit in the door under the enclosure, and if possible not to cut the doors?
TIA
