Connecting fuel lines OEM to AN

[Atl_monte]

I know this says LSx but this question is regarding an LT1 and how to connect the OEM fuel lines the run down the passenger side of a g-body to the OEM fuel lines on the driver side of the engine I've already purchased the adapters to connect the OEM lines on the engine to AN, I've noticed a lot of these conversions are running fuel cells or modified fuel tank so they're probably just running braided line all the way, I've thought of rubbing braided all the way but how would I adapt to the OEM intake fuel pump?

 

[Atl_monte]

Anyone?

 

[DavidM]

Racetronix sells a GBody Fuel Hanger with AN Fitting. They also make complete braided lines for a LC2.

 

[DavidM]

 

[Atl_monte]

Is there a way to adapt the lines on an OE unit?

 

[DavidM]

Is there a way to adapt the lines on an OE unit?

http://www.turbobuick.com/forums/index.php?threads/415581/

 

[Atl_monte]

Where does the vent line connect if you have removed the charcoal canister?

 

[DavidM]

Where does the vent line connect if you have removed the charcoal canister?

No where..... most clip the line back at the tank