You can type here any text you want

correct altenator help

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

drive805

Member
Joined
May 30, 2001
Messages
291
I have an 85 with 87 change over the alternator went out one parts guy says I have the wrong one for my car should be 90amp mine on case has 108amp.... I said I want 120 amp said they won't Warranty part due to incorrect applicationat this point iI don't care just want correct part.... should I go 90/108/ or 120 amp thanks
 
X2 on the 120
What is wrong with the one you have? Are you sure the volt light in the dash isn't holding it back?

Posted from the TurboBuick.Com mobile app
 
X2 on the 120
What is wrong with the one you have? Are you sure the volt light in the dash isn't holding it back?

Posted from the TurboBuick.Com mobile app
the one that i had was making allot of noise, like the bearing was going out, plus it would vary on charging from 13.2-13.8 volts on scan master. I changed the dash bulb when i had the dash rebuilt ( digital) As far as i know the charge light is good .
i installed a new 120amp alt and its showing 14.2-14.6 volts i like that much better
 
where is the best place to get a rebuild kit for my alternator. cs144 and is 200 amp over kill?
 
Back
Top