Dynamic EFI EBL Flash System For GM Sequential V6 Boosted Engines....

[liquidh8]

I don't use the scan master with mine, I just have a tablet I use to datalog when I need.

 

[johnnyttype]

I don't use the scan master with mine, I just have a tablet I use to datalog when I need.

I know you were pretty familiar with the dynamic efi setup. Do you run a lock up or non-lock up torque converter? I just changed mine back to Lock up in the car and thought i had all the flags and parameters set correct, but the ecm will NOT command lock-up. It can be manually done by the ALDL but not by itself while driving.

 

[liquidh8]

I run a lock up converter. I'd have to dig back into the tune to check my flags, its been some months since I've messed with it since the engine is hurt.

 

[johnnyttype]

I run a lock up converter. I'd have to dig back into the tune to check my flags, its been some months since I've messed with it since the engine is hurt.

I appreciate it! I found a Stock Bin file that was different from my original download. Turns out my original was for non lock i guess.. been 12 years almost. The TPS% to Unlock and TPS% to stay unlocked were all Zero'd out. I uploaded the changes this morning and will report back tonight or tomorrow, feeling pretty confident.

 

[johnnyttype]

It was the TPS unlock tables! All is well now

 

[liquidh8]

Perfect! Glad you got it sorted, had family visit all weekend so never opened the tune.

 

[chris]

What is the latest version of the ECU and the XDF files? Are there any pin changes with these?
I have version 12.
thanks
Chris

 

[liquidh8]

Shoot, I don't remember. My car has been down over a year with a hurt engine, so I am far removed from recent tuning. Have you checked the website or over thirdgen?

 

[chris]

I found the files over at third gen. I need to power up the ECU and pull the bin file. It’s been over a decade since I used this system, I’ve got some re-learning to do.

 

[liquidh8]

I found the files over at third gen. I need to power up the ECU and pull the bin file. It’s been over a decade since I used this system, I’ve got some re-learning to do.

Good to hear you found em. I'll be doing the same thing this year, relearning and trying to remember what I did in my last tune, shouldn.t be too bad though, just rusty on the tunerpro.