You can type here any text you want

couple te44 questions

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

grocerygetter

Active Member
Joined
Mar 8, 2005
Messages
1,203
will the stock wastegate actuator bolt up to it?
will that actuator be fine for 20 psi or less?
how much bigger is the exhaust housing than the stock garrett one off our cars?
 
From what I remember the stock or TA Style Housing Actuators are not able to be used on the TE Series Turbos.
 
Hi,
Kirban sells a nice one, also, with the kind of boost a 44 can make, you might want to use a BOV.
 
I just figured I'd try it...if you keyslot cut the back hole on the stock wg bracket...furthest from the actuator...it will bolt up. Feels pretty secure, I'll give it a shot.
 
John Wilde said:
From what I remember the stock or TA Style Housing Actuators are not able to be used on the TE Series Turbos.

Easy to use a TA series wastegate if you use a few washers and longer bolt to hold either a STOCK or HD wastegate to the compressor housing.
Search here for my post
BW
 
83ttypecooled said:
Hi,
Kirban sells a nice one, also, with the kind of boost a 44 can make, you might want to use a BOV.

Might as well try and sell muffler bearings too?
 
no offense to anyone...but BOVs are NOT to be used for boost control....if you are...you got some issues.
 
So when you gonna bring that thing to the track so I can show you where the finsh line is at? :D
 
I'd like to go this weekend...high is like 74. I'll call you. I'll promise you...I'll know what the back of your truck looks like probably all the way down the track..LOL.
 
Back
Top