Crower off the shelf roller grind

[KWIKR 1]

What do you guys think of this Crower off the shelf grind for a turbo v8 street/strip ?

Crower Cams & Equipment - Camshaft Specification Card

 

[John Wilde]

What do you guys think of this Crower off the shelf grind for a turbo v8 street/strip ?

Crower Cams & Equipment - Camshaft Specification Card

This looks ok to me for 23* Headed Street Car.
Do you get deal on Crower?
I would consider a call to Ken Duttweiler or Steve Petty if I was you.

 

[KWIKR 1]

This looks ok to me for 23* Headed Street Car.
Do you get deal on Crower?
I would consider a call to Ken Duttweiler or Steve Petty if I was you.

I can pick that cam up at Jegs for $268 . I have been going back and forth on that one and a custom ground with the following specs for more money ($375) .



Grind Number: 296-88RH

Intake Duration (gross): 294

Exhaust Duration (gross): 288

Intake Duration (.050?): 238

Exhaust Duration (.050?): 232

Intake Valve Lift*: .578"

Exhaust Valve Lift*: .570"

Lobe Separation: 115

Intake Valve Lash: .000"

Exhaust Valve Lash: .000"

RPM Range:
3200-7000
*Based on 1.5 Rocker Arm Ratio

 

[Dusty Bradford]

Looks ok for a 350-383ci street engine.

 

[KWIKR 1]

Thanks guys . I'm just waiting on the the specs of one more custom grind coming from another cam guru . I'll post it when I get it . for those that maybe interested , here's a link to the twin turbo kit .

Company | Wrenchrat

 

[Louie L.]

Who are you dealing with on that custom cam? Just FYI there are a few Comp grinds available that are turbo friendly. They were discussed in Turboforums.com

 

[KWIKR 1]

Who are you dealing with on that custom cam? Just FYI there are a few Comp grinds available that are turbo friendly. They were discussed in Turboforums.com

Schneider Racing Cams/Dougherty Racing Cams . if you can send me the link from turboforums.com that would be great . thanks .

The only off the shelf comp cam I've looked at is this one (see specs below). it's solid roller . I like to stick with a hyd roller . and one from their XFI line up ( XFI292 ) . I spoke to Comp and they suggested one of their custom grinds 230/230 @.050 .560 lift/1.5 114+2 .

CCA-12-704-8/Mech Roller :

Advertised Duration 300 int./308 exh.
Advertised Exhaust Duration 308
Advertised Intake Duration 300
Basic Operating RPM Range 3,000-6,500
Cam Style Mechanical roller tappet
Computer-Controlled Compatible No
Duration at 050 inch Lift 255 int./262 exh.
Exhaust Duration at 050 inch Lift 262
Exhaust Valve Lash 0.020 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.575 in.
Grind Number CS 300BR-14
Intake Duration at 050 inch Lift 255
Intake Valve Lash 0.020 in.
Intake Valve Lift with Factory Rocker Arm Ratio 0.575 in.
Lobe Separation (degrees) 114
Notes Requires thrust button and wear plate.
Quantity Sold individually.
Valve Lift with Factory Rocker Arm Ratio 0.575 int./0.575 exh.