Cruise control not working

[XFactor]

My cruise control seems to be not working. Doesn't light up on dash niether. Fuse is fine. Any idea's??????????

 

[Intercooler]

Hole in your diaphram Clip and cable fell of the TB. Bad VSS sensor. Broken cable.

 

[tc86gn]

Check your switch activated by the brake pedal. That is also a common solution.

 

[salvageV6]

Check the brake pedal switch first.

Make sure you are activating it over 25mph too.

 

[hi-wayusedparts]

I had to replace my lever. The wires had pinched and broken!! Also check the cable to the servo and make sure the plastic end is not broken.

 

[salvageV6]

If you have checked out the brake switch and need to check the stalk wiring and switches I have made a stand alone box that simulates the stalk and plugs into the connector easily in the dash. Only have to undo the lower cover and try it out.

I can bring it to the Walmart cruise which I think is saturday if you want to try it.

 

[ronbuick]

Check for a vacuum leak!

 

[XFactor]

Sounds good "SalvageV6". Haven't got a chance to check the brake switch yet though. But I was thinking about going to Walmart anyway. No work! .

 

[salvageV6]

If the weather is good I will try and make it.

Gotta really clean the GN though.

I will bring some tools and we can fix it in the parking lot most likely it's the brake switch.

If not we can hook up the switch simulator I made and you can try it on the way home.

 

[Chris McDade]

I also had to replace to turn signal lever. Works like a champ now.

Good Luck

 

[XFactor]

Hey SalvageV6....................your trick worked!!! On the way home the cruise worked like a champ!