Custom CNC Machining?

[V6UnderPressure]

Does anyone know of a company who will custom make something? I need some very small pieces made that is basically an inch long by 1/2 inch wide with one hole it in. I'd pay for a run of them depending on cost. I was just curious as what I need is very simple. Anyone got any leads?

 

[coach]

Send me a drawing.
Edm@ttmp.com
Subject line: TurboBuick.

 

[V6UnderPressure]

Send me a drawing.
Edm@ttmp.com
Subject line: TurboBuick.

Will do!

 

[WHITE T]

I might be able to help as well.

If Coach can't do it let me know.
Thx

 

[chopped39]

I got a guy in Ill that has cnc equipment that can make custom parts.

 

[V6UnderPressure]

I had the drawing made, and it is in PDF format. Here is a shot of it. Anyone have an idea how much it would cost to make these?

 

[Permagrin]

Send me a drawing.
Edm@ttmp.com
Subject line: TurboBuick.

Perfect email address for the job.

 

[coach]

I had the drawing made, and it is in PDF format. Here is a shot of it. Anyone have an idea how much it would cost to make these?

3 things...How many?
Is the hole on the same centerline as the 5/16 radius on the end of the part?
What is it going to be made out of?

Looks pretty simple. Give me a material and a quantity and I will give you an answer.

Do polished stainless and make Turbo 6 dogtags!!!

Thanks
Coach

 

[V6UnderPressure]

3 things...How many?
Is the hole on the same centerline as the 5/16 radius on the end of the part?
What is it going to be made out of?

Looks pretty simple. Give me a material and a quantity and I will give you an answer.

Do polished stainless and make Turbo 6 dogtags!!!

Thanks
Coach

Not sure what you mean about the hole??? I'll have to measure and check. Material would be aluminum or stainless steel, whichever is cheaper. Quantity I would say 10 for now, but depending on price, I could buy 50. It all depends. I'll measure for you today and verify location of the hole.

 

[V6UnderPressure]

Ok, I confirmed that the centerline of the hole is 13/16" from one side and 5/16' from the other side. And centered on the horizontal length of 5/8" Does that make sense?

 

[novaderrik]

that's about 30 seconds of programming time at work..

 

[coach]

Parts are done. Just letting the other guys know.

Coach