Deep oil pan and pick up tube for Stage 2

[jdpolzin]

I need a deep pan and an oil pick up tube for a Stage 2 off center block. The pick up has to clear a 3.625 crank. I had one lined up with a guy but havent heard back from him. Thanks! -----Jeremy

 

[turbofabricator]

Steel or aluminum? If you are having trouble, let me know and I can fab one for you. RJC has a steel pan for the 14 bolt block (which a stageII of center is) If the pick-up hits the crank you should consider an external feed line. That's usually the route I take. You also might try Dan Strezo, he usually has what ever you need for a stageII DLS Engine Development-Dan Strezo- 219-956-3653

 

[jdpolzin]

Yeah, actually I do have a pan lined up but I am in need of a pick up tube. I am trying to keep the line internal if at all possible. If I need to buy a pick up tube and pan I will but really I just need a tube to clear a 3.625 crank. Dan is doing my cam, heads, and intake, I will ask him. Thank you for the help, this is really the last piece I need to get the motor on the ball! ------Jeremy