Devils Own check valve sucks....

[Dust]

May not be possible for those with SS lines, but I found this on the DOA website.

Devilsown Methanol Alcohol Water Injection - View Single Post - Cleaning the tank

 

[Razor]

That will cuase a multitude of problems. First is the adhesives used in that filter will breakdown with methanol, next is it poses a restriction to the inlet of the pump which will lead to a pressure drop in the output.

The poster should have done a better job with cleaning his tank before running into the issues he's had.

Thanks for the link. Guy's with the Alkycontrol kit.. dont do this.

 

[Pronto]

I'm still confused with the location of the nozzles.

 

[Dust]

I found 2 PN for the Wix version, and I sent them an email about methanol compatibility. When I hear back from them I will ask about flow restriction.

 

[Razor]

The only filters I found where from Purolator for a Chrysler flex fuel vehicle. They were made out of stainless and used a special adhesive.. but the issue is any filter with a small micron rating will pose a restriction. This is why they ar placed after fuel pumps not before. A strainer is whats needed to keep trash out of the pump, not a filter. The issue is size, materials, etc.

HTH

 

[Razor]

The only filters I found where from Purolator for a Chrysler flex fuel vehicle. They were made out of stainless and used a special adhesive.. but the issue is any filter with a small micron rating will pose a restriction. This is why they ar placed after fuel pumps not before. A strainer is whats needed to keep trash out of the pump, not a filter. The issue is size, materials, etc.

HTH

 

[Dust]

I don't think the filter will pose a restriction for my flow rate, but might be a problem for those above.