Do you have a nice garage?...Yes?...pictures please!!

[toofastforyou]

I'm having a two car garage built to house both my "toys"...and would have liked to see pictures of yours to give me some ideas on how to finish the interior to make it look great and functional...so if anyone of you could post some pictures it would be greatly appreciated!
thank you ,

Claude

 

[raflyer]

www.hoosierperformance.com

Thats my 4800sqft garage

 

[TR Custom Parts]

If you want to get sick, look at this site! http://www.ultimategarage.com/

 

[John Larkin]

Rob Archer (raflyer), back from the dead? You are the guy that had the white Canadian T 6 years ago? Had no idea you had a shop of your own.

 

[ghall]

Here is a couple--bottom photo is after the ucoat was put down--the top pic is the right half as it sits now. :smile:


Geoff

 

[URSPANKED]

You need to get rid of all that clutter in there, and it would be perfect. I'll even furnish the truck and trailer to get rid of all that mess!
Very nice facility!

 

[Grumpy]

Damm!!!! A Shelby Mustang with Buicks!!??

 

[Little6pack]

If you want to get sick, look at this site! http://www.ultimategarage.com/

Dang I am sick now.. those garages are better than my home

 

[Little6pack]

Damm!!!! A Shelby Mustang with Buicks!!??

Grump, You need a smaller house & a bigger garage .

 

[Grumpy]

Grump, You need a smaller house & a bigger garage .

NO !!!!! I need fewer cars !!!!

 

[ghall]

Damm!!!! A Shelby Mustang with Buicks!!??

Me or you--hahaha--J/K. i love when you post pics of your excess :tongue: :biggrin:



Geoff

 

[TurboDave]

Mine isn't as elaborate as some, but a lot more than I've had.

http://home-and-garden.webshots.com/photo/1304836738032787999dMZPnF

http://home-and-garden.webshots.com/photo/1251864143032787999VtOWKG

http://home-and-garden.webshots.com/photo/1304836863032787999DhxWOl

The upper garages obviously hold the GN's.

The lower garages hold my 84 Z28 and temorarilly holding Daughters 87 whiteT

 

[smokin'6]

I love the tool boxes with the granite counter tops, yeah, they really do alot of work in there

If you want to get sick, look at this site! http://www.ultimategarage.com/

 

[Dwayne]

here ya go

 

[JoeNational]

Dont mean to Hijack but how is that UCOAT it holding up and how long was the process from start to finish?

Thanks,

 

[top gun]

Dont mean to Hijack but how is that UCOAT it holding up and how long was the process from start to finish?

Thanks,

I am going to apply the U Coat it epoxy this weeked in my garage, Ill keep you posted.

 

[chevyII]

You need to decide if you want a garage to show off or one to work out of. Workking as a mechanic for years taught me a few things. overhead drop light and outlet on reels is a must. Air compressor lines across my work bench. A 100' air reel on the side if the bench close to the floor. I also made my bench from 2x2 box steel and topped it with 1/4 plate. Raised to up to a level not to be bent over like a sink in the kitchen. Run 220 with at least 100 amp service. I would take pics of mine but man it trashed right now.

 

[top gun]

First two coats of epoxy down no problems, last coat tommorow.

 

[vicious6]

Here is a couple--bottom photo is after the ucoat was put down--the top pic is the right half as it sits now. :smile:


Geoff

Geoff you really suck! Awesome fleet!

 

[SVORay]

Thats some sick garages people


You guy got me beat by a looonnngggg ways.


I hope this does hijack this to much, but does anyone have some work bench counter top pictures? My wife wants to use granite tops but doesn't understand they want take any abuse. Just looking for something that will look great and match...the problem is the cabnets etc are all painted Jet black and the walls Silver. I had to match my Harley truck and future GN