Draglites lug nuts?

[WhiteTtype989]

Will these lug nuts#63002(mcgards) Rears- work with 15/8 draglites 4.5 backspacing qrt inch spacer stock axles/studs . 15/3.5 4.5bs. up front stock suspension 87 ttype .Will Stock studs in rear work with the spacer ? Any help appreciated search didnt come up with much .

 

[WhiteTtype989]

22551491 did find # thats the gm longer studs . now my only ? is what are you guys running for open ended lugs .

 

[pacecarta]

those lugs will grab the studs and will work with or without spacers but.... unless this is for a street tire and not going to the track its foolish to use welds without the correct length aftermarket long lug studs
the threads need to be at least 12mm past the face of the rim and the lug nut washer and engage threads in the lug nuts to be legal to run at a track . the mcgards lugs have the required threads and IMO are the best lugs available

 

[WhiteTtype989]

OK thanks so i got the right stuff ill use those lugs and order those gm studs for the rear? unless you guys are running something else . Mt drags are going on.

 

[bison]

Will these lug nuts#63002(mcgards) Rears- work with 15/8 draglites 4.5 backspacing qrt inch spacer stock axles/studs . 15/3.5 4.5bs. up front stock suspension 87 ttype .Will Stock studs in rear work with the spacer ? Any help appreciated search didnt come up with much .

Imo there is nothing safe about running stock wheel studs in the rear with any drag lite or pro star wheel. You will never have enough thread engagement. You need to replace those short studs.