Duttweiler oil pump, lines

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

BLACK MAGIC RACING

formerly turbo_canuck
Joined
Jul 18, 2001
Messages
877
I'm selling my Duttweiler oil pump. Was on my off-center stage motor, dipped into the 8's with it, oil pressure was always rock-steady. Has maybe 30 or 40 passes on it, no street miles. Comes as shown, with lines, new gasket, gears and instructions. Paid $350, asking $225 neg. Thanks!
 

Attachments

  • DSCF2802.jpg
    DSCF2802.jpg
    56.9 KB · Views: 226
Do you have to put a notch in the frame for clearance?

Thanks
Prasad
 
put me in line subject to shipping and the frame notch question please
 
I've had a lot of questions about what else is needed to install this, here goes

-Block needs to be drilled and tapped for 1/2" npt where the oil feed block used to be, this is the new oil feed to the block. and a fitting to go from 1/2 npt to -10 AN

- a remote filter setup, lines

- oil pan needs a -12 an suction fitting

- holes in front cover need plugged

Thanks all
 
Back
Top