EGT peak & hold Meter

[chris]

I have a Fluke 8024A with peak & hold capability that has type K thermocouple functions. I need to know what I need to do, or buy to get this to work for EGT. I don't have a operators book on this so I don't know what it takes to connect the thermocouple.

thanks

 

[salvageV6]

Westach EGT clamp probe or one from Omega Engineering will work.

One fitting with the proper type pins for the K type input to the meter. Prolly a Fluke part.

 

[Fast231]

Check with fluke and find a dealer, they sell the connectors in a two pack. I can find my package and get the PN if you have any troubles.

 

[chris]

I'll try to find a fluke dealer, but could look up the number?

 

[Fast231]

80CK-M Is what my fluke meter took. The package just sayes Type K male thermocoulper connector.

http://www.flukecanada.ca/products.cfm Mine is the 50D, has two small flat connectors, One big and one small

HTH

 

[Intercooler]

Check E-Bay. I see that stuff on there all the time for cheap. You may have to enter several key words to get at it but it is there.