Does anyone make a boost controller that will control the boost electronically... and provide an input to change the boost to another setting when I go into high gear....
Internal wastegate
No CO2 ....... (daily driver capable... limited strip action)
I really want a controller that has an easy adjustment.... that will hit the same boost level regardless of temperature.... it needs to be where I can turn it down to a minimum setting (I assume this setting will be wherever the wastegate rod is set).... and be able to cut it back up to say 25 psi... no fiddling to tweak it to 25 psi.... and yet have a separate input... that when triggered... will scale the boost back to say 23 psi... when I trigger it.....
Oh.... reasonably priced would be a plus....
I was looking at the Greddy ProfecB SpecII, but it doesn't have third gear scaling I don't think.
Internal wastegate
No CO2 ....... (daily driver capable... limited strip action)
I really want a controller that has an easy adjustment.... that will hit the same boost level regardless of temperature.... it needs to be where I can turn it down to a minimum setting (I assume this setting will be wherever the wastegate rod is set).... and be able to cut it back up to say 25 psi... no fiddling to tweak it to 25 psi.... and yet have a separate input... that when triggered... will scale the boost back to say 23 psi... when I trigger it.....
Oh.... reasonably priced would be a plus....
I was looking at the Greddy ProfecB SpecII, but it doesn't have third gear scaling I don't think.