Extender Extreme 101 - Questions.

[Jerryl]

Does anyone have a list of parameters for the Extender Extreme chip Version “F”?
Looking for a list that has the parameter listed with the corresponding number.
Example;

The adjustable parameters are:
Shift Light: 8
DFCO delay: 9
Fan Temperature:
Cruise TCC:
WOT LoGear Spark:
BLM correction:
System Options:
WOT TCC:
Spoolup Fuel:
LoGear Fuel:

 

[TurboBuRick]

Buick Chips - Full Throttle Speed Tech Support

 

[Jerryl]

Buick Chips - Full Throttle Speed Tech Support

Thanks Rick!
I am used to the TT set-up so this is entirely new to me. :redface:

Here is a stupid 101 question;
Can you tell me the parameters for “lean cruise” and “launch assist”?
Is the following correct?

Open Loop Idle = 4,
Lean cruise = 2
Launch Assist = 1.

I really would like to have someone talk me through the basics since I'm using SM.

 

[TurboDave]

Thanks Rick!
I am used to the TT set-up so this is entirely new to me. :redface:

Here is a stupid 101 question;
Can you tell me the parameters for “lean cruise” and “launch assist”?
Is the following correct?

Open Loop Idle = 4,
Lean cruise = 2
Launch Assist = 1.

I really would like to have someone talk me through the basics since I'm using SM.

Those are the parameters. Cell 12 is where they reside. Example: Lean cruise and launch assist on = 3 set into cell 12
or
open loop idle and lean cruise = 6 set into cell 12.

 

[Jerryl]

Those are the parameters. Cell 12 is where they reside. Example: Lean cruise and launch assist on = 3 set into cell 12
or
open loop idle and lean cruise = 6 set into cell 12.

Thanks Dave!
You have PM.

 

[TurboBuRick]

Looks like Dave has you squared away.

 

[Jerryl]

Looks like Dave has you squared away.

Thanks Rick!
TurboDave got me squared away.
Thanks Dave!!!

Just for future searches;
Listed on the directions are;
Open Loop Idle = 4, Lean cruise = 2, Launch Assist = 1 for parameter 12.
So if the owner wants lean cruise + open loop idle, you get to parameter 12 as seen on the INT, and get BL with the throttle to; 4+2 = 6.

If the owner wants;Lean cruise+Open loop idle+launch assist, you get parameter 12 on the INT to;4+2+1 = 7 on the BL.

I think it is clear as mud now. :wink: