f/s liquid intercooler

need2bfaster

Member
Joined
Jun 3, 2005
stock location liquid intercooler with 1/2 npt end. comes with brand new heat exchanger and pump. exchanger has 10 an fitting and is 14x13x2. pump is 240 gallon per minute 23ft total lift. 750.00 shipped in lower 48 feel free to ask any questions

pic will be posted by ryansgndoes10s
 
pic 1
 

Attachments

  • car002.JPG
    car002.JPG
    68.7 KB · Views: 545
Same as above who made this??? and Is it just a stock IC made to be A liquid IC?? Or is it a custom made unit from a Name Brand Vendor?? Can we see a Photo of the back of it?? and What does it flow CFM wise?? Looking for something to suport 700-800 HP

I am super interest as we were thinking of building something like this soon.

So get with me on it ASAP thanks
Derek
 
it is a stock-stretch/big neck that was made to a liquid intercooler by rpm
the heat exchanger and pump cost over 500 and they both are brand new
 
pump is 240 gallon per minute

Gallons per hour maybe?? no way that thing pumps 240 gal a minute.

That does look like a nicely done set up. Could you post the name and model numbers of the pump and the HX so we can look up any info on them? Maybe some demensions on the HX would also be nice.

Thanks: Jason
 
yes im sorry 240 gallons per hour, heat exchanger is 14x13x2 with 10 an in and out
thanks and will post back with part #s
 
what about us upper 48 no shipping for us TTT for a good guy :biggrin:
 
Whats the CFM or flow ratting on this??

Or what hp will it suport??

We are running a TE65 turbo and I was told the stock IC is a big restriction in air flow could be why you are havin a tuff time selling this???
 
Top