You can type here any text you want

Fast with fuel pump controler ?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Turbopoul

Member
Joined
Jan 1, 2009
Messages
47
Hey would it be great if we could have a fuel pump control feture ( Aeromotive 16306 ) built in FAST ?
 
It would be hard to implement in the box, you would have an external box with PWM control input. You could get a PWM output from the egr table though, but I'm sure its not rated not for more than 2 amps.
 
It would be hard to implement in the box, you would have an external box with PWM control input. You could get a PWM output from the egr table though, but I'm sure its not rated not for more than 2 amps.

You can still use FAST to control the Aeromotive box with one of the 4 aux ouputs like I do.

Allan G.
 
You can still use FAST to control the Aeromotive box with one of the 4 aux ouputs like I do.

Allan G.
I'm not too familiar with the inputs the aeromotive controller but, if you say it can be done then I guess it can.... then wow
 
I'm not too familiar with the inputs the aeromotive controller but, if you say it can be done then I guess it can.... then wow
Norbs,
The Aeromotive controller requires a ground signal to switch to High setting. I use Aux output 1 (Pin B1) to activate when TPS and RPM thresholds are meet.

Allan G.
 
So the controller only has high and low, nothing variable like a kenne bell boost a pump setup?
 
Back
Top