Filler install question

[rtviper]

I installed the front bumper filler's with no problems but the rear's are acting up. Is it necessary to remove the tail lights to better install the filler's. These are the fiberglass fillers. The dimples I drilled out are no where lined up with the studs they mount on.
Thanks

 

[aminga]

I installed the front bumper filler's with no problems but the rear's are acting up. Is it necessary to remove the tail lights to better install the filler's. These are the fiberglass fillers. The dimples I drilled out are no where lined up with the studs they mount on.
Thanks

Yes.

 

[turbonut85]

Yes.

X2.

 

[GNRick]

I did my rear fillers and don't recall any problems. I bought mine from Kirban. Where did you buy yours from?

 

[BILL HAINES]

Rear Fillers

Rt Viper, Mine Were From Danko Direct. T-lps Need To Be Removed. I Drilled Holes,needed To Die-grind To Move Fillers To Needed Position, I Had My T-lps In And Out Approx 5-6 Times To Achieve A Happy Medium Fit. I Also Worked The Fiberglass At The Inner Bottom Edge (near Rev Lp) The Aftermarket Replacements Were A Bit Of A Pia..