Finishing Off My Garage Project

[SpeedRacerX]

Hi Everyone,

Just thought I'd share a little project I've been doing during this cold and wet winter. My brother in law has been helping me. It's been moving slow because if the weather doesn't cooperate, I can't move the GN and other stuff out of the garage so we have room to work. Amazingly, even my sons chipped in some labor. Lol. I had several long shelves on the side wall and a mesh loft above one of the garage doors prior to this project. Now that I've tossed a bunch of stuff in the trash and have garage attic space, I won't need the loft and will probably only need half of the six, 8 foot long shelves I had up.

Sent from my SM-G965U using Tapatalk

 

[SpeedRacerX]

Additional progress.

Next up is trim then prime then two tone paint.

Sent from my SM-G965U using Tapatalk

 

[1986 Buick GX1]

Very nice!!
Two tone paint?? Black and gray? Lol

 

[SpeedRacerX]

Very nice!!
Two tone paint?? Black and gray? Lol

Yup. That's where I'm leaning.

Sent from my SM-G965U using Tapatalk

 

[Chuck Leeper]

I won't need the loft and will probably only need half of the six, 8 foot long shelves I had up.

Guess again! There is NEVER enough space to pile "stuff". BTDT!

 

[SpeedRacerX]

Paint is done. Misc touchup, outlet plates, some lights and then garage reassembly. This was a bigger project than I thought.

Sent from my SM-G965U using Tapatalk

 

[1986 Buick GX1]

Paint is done. Misc touchup, outlet plates, some lights and then garage reassembly. This was a bigger project than I thought.View attachment 340556View attachment 340557View attachment 340558

Sent from my SM-G965U using Tapatalk

WOW!!! That is an incredible transformation!

That looks fantastic. I'm jealous, big time.

 

[berserker6]

Paint is done. Misc touchup, outlet plates, some lights and then garage reassembly. This was a bigger project than I thought.View attachment 340556View attachment 340557View attachment 340558

Sent from my SM-G965U using Tapatalk

Owning a Buick should have prepared you for this being a bigger project than you thought lol
Looks great!

 

[turbobuick]

Looks good!

 

[Hahny]

Paint is done. Misc touchup, outlet plates, some lights and then garage reassembly. This was a bigger project than I thought.View attachment 340556View attachment 340557View attachment 340558

Sent from my SM-G965U using Tapatalk

Looks great!

 

[SpeedRacerX]

Some updated pics for this project.

Put a nice big ass garage light right over my motor so I can see when the hood is up.

We did the Mini split air and heat a couple months back and it has been geat.

My favorite add is the GN clock. Lol.

Never enough space for stuff. Unbelievable.

Sent from my SM-G965U using Tapatalk

 

[~JM~]

Are those floor panels/tiles adhered to the slab, or are they the type that interlocks & lays on top?

I had some of the interlock type in a previous garage. Condensation from the concrete was trapped in between & began to mildew. Had to remove them & clean the floor.

Your garage looks very nice!

 

[SpeedRacerX]

Are those floor panels/tiles adhered to the slab, or are they the type that interlocks & lays on top?

I had some of the interlock type in a previous garage. Condensation from the concrete was trapped in between & began to mildew. Had to remove them & clean the floor.

Your garage looks very nice!

Interlocked and laying on top. Never had an issue but I'll take a look.

Sent from my SM-G965U using Tapatalk

 

[Bullnerd]

Lookin good!

My wife bought me one of these for my shop in progress, Would look nice in your shop too.

(Temporarily hung)

 

[gnxtc2]

I would call a garage door guy and have the garage door tracks moved higher towards the ceiling. Otherwise it looks good.

Billy T.
gnxtc2@aol.com

 

[michael evans]

Some updated pics for this project.

Put a nice big ass garage light right over my motor so I can see when the hood is up.

We did the Mini split air and heat a couple months back and it has been geat.

My favorite add is the GN clock. Lol.

Never enough space for stuff. Unbelievable.View attachment 347087View attachment 347088View attachment 347089View attachment 347090View attachment 347091View attachment 347092

Sent from my SM-G965U using Tapatalk

Where did you get the tilting light ?

 

[SpeedRacerX]

Where did you get the tilting light ?

Commercial and Industrial LED Light Fixtures from Big Ass Light

Big Ass Lights are made of anodized, extruded aluminum to handle the toughest places, from warehouses to gymnasiums to your garage. Try them risk-free!

www.bigassfans.com

The 13,000 lumen light I bought with wall bracket is no longer on their website but can be ordered if you call them. They make a different style garage light now.

Sent from my SM-G965U using Tapatalk