Squid4life
Well-Known Member
- Joined
- Jul 5, 2004
- Messages
- 6,275
I was looking at the picture posted above in the basic hot air sticky with the firing order and coil pack wiring diagram... Is the pic of the coil pack correct? Mine is a mirror image.
Theirs:
1 5 3
4 2 6
Mine:
4 2 6
1 5 3
Shouldn't matter as long as the plug wires are routed correctly, right? Mine has the coil pack harness out the drivers side, like normal. Just curious.
Also, I asked htis in another post about my car pingind/ runnning like crap, but what is the hose between the bottom of the turbo housing to the throttle body for, and what would happen if it was kinked? Mine is kinked, but not sure if I'll be able to un-kink it due to the angle of the two barbs...
Thanks!
Squid
Theirs:
1 5 3
4 2 6
Mine:
4 2 6
1 5 3
Shouldn't matter as long as the plug wires are routed correctly, right? Mine has the coil pack harness out the drivers side, like normal. Just curious.
Also, I asked htis in another post about my car pingind/ runnning like crap, but what is the hose between the bottom of the turbo housing to the throttle body for, and what would happen if it was kinked? Mine is kinked, but not sure if I'll be able to un-kink it due to the angle of the two barbs...
Thanks!
Squid
