First runs with dynolisous

BOP4ever

Member
Joined
Jul 6, 2007
I put my new injectors in last week and made my first test runs.
I was kind of disapointed but maybe it is about right for what I have in the car. The best run was 14.03@97.
Best mph was 99.7 average of 7 runs was 14 to 14.5 mph was 96 to 99 .
The car was spinning bad in first 60 ft was in the 2.5 range.
Turbo link showed 700's for o2 and I was getting some knock 3 degrees in thirdon most runs max was 8.
I think I have a lot to learn
 
With 3 to 8 degrees of kr, I think you need more fuel or lower boost. Where in the 700's were you? How much boost and what type of gas? With my old narrow band set up I would usually tune for 775 to 810 on the scanmaster to avoid kr. Detonation will kill your motor. A very small amount of kr on the shift is ok....but play it safe. Just offering some advice. Good luck w/ your ride.
 
Thanks,
I am very new to this ...
I went up 2 psi on the fuel rail this evening and made a couple of passes.
best run was 14.23@101.8
First run over 100 mph !!!!
if the Ipod is right it liked the fuel.
KR was less and was Zero on that run.
O2 still in the 740 to 800 range most about 750.
I do not see a big difference.

I am on 93 octane and Alky.
18 psi


O2
835.94
769.53
765.63
812.5
781.25
773.44
777.34
761.72
757.81
757.81
757.81
742.19
746.09
 
what size nozzle do you have on the alky plus you need to get a turbotweak chip.You cant beat the tunability that eric puts in his chips.Also my expreience with that program turned out to be over a second off so i wouldnt trust it.MO
 
I have a tt chip in it now with 42lb injectors. Made two runs on cool morning new best 14.05@106mph !
 
Top