Fresh BRF Tranny with barke and Art Carr 10" converter

[Beamer]

I have a freshly rebuilt by Lonnie Deers of Extreme Automatics 200-4R, original BRF valve body tranny with a stage right brake and a Texas Art Carr 10" converter to sell.

There was slippage observed after installing my 112 roller setup and Lonnie discovered an incorrectly installed valve or something like that. He went through it thoroughly and it is ready to go with the 10" Art Carr converter with stamping of "AC-16930" on it. It is around a 3200 stall, and it worked very well with my PT-54 turbo. It has a stage right trans brake installed and launches very nicely. When draining the fluid, there was no metal in it, Only burnt. It will be at the buyers optioin to have the converter flushed. It has been completely drained, by recommendation of Lonnie. He stated that it would be added insurance for a flushing.

This is a great ready to install package for a low 11 or high 10 second car. The tranny appeared to have Art Carr internals from the original build prior to my purchase of the car.

The price is $1900 for the combination, I do not want to split it up. If that is desired by 2 different individuals and can arrange it, go for it. I will deliver up to 150 miles from Brunswick, GA. Any shipping charges will be at purchasers expense.

Thanks for your interest...

Mike

 

[Beamer]

BUMP TTT


And I forgot to mention before, it is a non lockup package.

Thanks,
Mike

 

[Beamer]

Price drop, ready to install and run

I'll take $1800 for the package, but would prefer not to ship. A couple of ship requests have came to me, but the costs seem to put it over the edge.

This is a nice combination. I am only selling due to decided to not install in my 72 Suncoupe. My TH400 is good nough and my highway driving is not enough to warrant an OD tranny.

Thanks,
Mike

 

[Woody1969]

What is the power handling on this tranny. I have a car running high 10's.

 

[Beamer]

What is the power handling on this tranny. I have a car running high 10's.

A high 10 to low 11 sec track car is appropriate. It has hardened parts inside it from the original build.

Thanks for your interest,
Mike

 

[Beamer]

Another bump TTT

Nobody looking for a ready to install tranny combo ?

Mike

 

[grocerygetter]

I know you'd prefer not to...but what about a price, sans converter?

 

[Beamer]

I know you'd prefer not to...but what about a price, sans converter?

I am not following the "sans converter"

Please help me...

Mike

 

[maxcom]

I am not following the "sans converter"

Please help me...

Mike

sans = without

 

[Beamer]

sans = without

That being the case, I do very much prefer to sell together. I will sell the transmission alone for $1500 and no less.



Thanks,
Mike

 

[Beamer]

Bumping TTT

 

[Beamer]

Another bump TTT

 

[Beamer]

By the way all...

This is a BRF tranny and requires NO CORE CHARGE ! ! !

Mike

 

[Beamer]

Wow, with no core, this is like $1400 for a tranny and convertor combo.

I guess I will just make another TTT

Enjoy all

Mike

 

[marleyskater420]

Can you list out some of the internal parts used?

 

[Beamer]

Can you list out some of the internal parts used?

Sorry... I just saw this when getting ready to bump. I never received an email from the board that there was another post. Let me get some details from Lonnie to be better explaining.

Mike

 

[marleyskater420]

Sorry... I just saw this when getting ready to bump. I never received an email from the board that there was another post. Let me get some details from Lonnie to be better explaining.

Mike

hah its ok. I ended up buying a brand new tranny from him because you never posted back.

Pretty stoked to get it in.

 

[Cme2fly]

I can vouch for this transmission...it shifts firm..This is a give away at this price.