TURBOELKY
Well-Known Member
- Joined
- Jun 27, 2005
- Messages
- 3,474
Looking for a few more parts:
champion fuel rails, for external regulator, don't need AN fittings or hose in the back
modded ecm for low impiedence injectors
75-83 psi injectors
4 bolt headers, ATR style.
Tial External gate 44mm or larger.
I will be having these parts i'm upgrading from, for sale or trade!
freshly powder coated stock fuel rail. 90% gloss black, professionally done. Show quality!!
60 psi. motron injectors, used with about 3k miles.
GN1 performance 3" maf pipe, polished. comes with 4-3" reducer (black) hose, and k&n filter
Kenny Bell FPR, anodized blue. Not sure on mileage, but great condition, works perfect.
HKS 40mm wastegate, attached to stock header, comes with driver header and cross over pipe. Gate has surface rust from sitting, but is in perfect working condition!
3" external down pipe. Must be used with gate on header, NOT ON PIPE! Great pipe, stainless steel, bolt on, NOT v-band. Has small area dinged to clear the elky's frame
cpt-66 turbo. Needs new oil seal, has small amount of in and out. Only has about 3-5k miles on it, but the oil seal popped from priming a motor with too small of an oil return
Polished housing, a/r 63 exhaust. 4"/2.5".
These parts are also for sale, will be posting prices later, in a new thread in "for sale" section. Thanks guys!
champion fuel rails, for external regulator, don't need AN fittings or hose in the back
modded ecm for low impiedence injectors
75-83 psi injectors
4 bolt headers, ATR style.
Tial External gate 44mm or larger.
I will be having these parts i'm upgrading from, for sale or trade!
freshly powder coated stock fuel rail. 90% gloss black, professionally done. Show quality!!
60 psi. motron injectors, used with about 3k miles.
GN1 performance 3" maf pipe, polished. comes with 4-3" reducer (black) hose, and k&n filter
Kenny Bell FPR, anodized blue. Not sure on mileage, but great condition, works perfect.
HKS 40mm wastegate, attached to stock header, comes with driver header and cross over pipe. Gate has surface rust from sitting, but is in perfect working condition!
3" external down pipe. Must be used with gate on header, NOT ON PIPE! Great pipe, stainless steel, bolt on, NOT v-band. Has small area dinged to clear the elky's frame
cpt-66 turbo. Needs new oil seal, has small amount of in and out. Only has about 3-5k miles on it, but the oil seal popped from priming a motor with too small of an oil return
Polished housing, a/r 63 exhaust. 4"/2.5".These parts are also for sale, will be posting prices later, in a new thread in "for sale" section. Thanks guys!
